Product Categories
Customer Service
Guangzhou JinSheng Trading co,,LTD
Adress:Qixin Road No29B5 building.DongYong. Nansha District. Guangzhou, China.
Tel：020-84615958
Fax：020-84618750
Whatsapp:+8613710013149
Face book:Vicky Zhu
Wechat：13710013149
E-mail：vicky_zhu33@foxmail.com
Website：www.jsun198.com
Machinery Series
Current Position：Home >> Products >> Machinery Series
250AB automatic guillotine Bone Machine
Details
Before slicing machine procedures: Before you use the device, open the secondary drum steam valve, preheat under the spout to avoid between the material and the cylinder have solidified layer, but does not operate properly, generally holding the material into a liquid state to . Open freezers, pumps and valves so that the cooling water displacement related to the main drum. Operation: Yasumasa switch intact. Before work start: Connect the power → Turn the machine start switch → Open → adjusts the inverter drive start switch knob, rotary speed can be adjusted to between 5-6 revolutions per minute, after the feed rollers can be adjusted according to the requirements of sections speed, slicing production will be determined according to the thickness and the cooling effect, the thickness of the sides by slicing machine bolts to make the appropriate adjustments. In spout bag splice. After the slice is completed, it should close the steam valve and turn off the secondary drum freezer and pumps and other related equipment. Shutdown: Close the drive start switch → Turn off the machine
Precautions:
1 prohibits indiscriminate access Luanla wires, switches and sockets must be on the wall. During equipment cleaning or cleaning, prevent water splashed on the power.
2 Non-staff prohibit unauthorized access workspace.
3 slicing machines work, such as in case of emergency should immediately turn off the emergency brake switch
4 Take sheet requirements, attention should be concentrated, non-work conversations with others, to avoid accidents. Non-staff prohibited to take tablets
Precautions:
1 prohibits indiscriminate access Luanla wires, switches and sockets must be on the wall. During equipment cleaning or cleaning, prevent water splashed on the power.
2 Non-staff prohibit unauthorized access workspace.
3 slicing machines work, such as in case of emergency should immediately turn off the emergency brake switch
4 Take sheet requirements, attention should be concentrated, non-work conversations with others, to avoid accidents. Non-staff prohibited to take tablets
Previous：No!
Next：320KT automatic slicer
Next：320KT automatic slicer